ENplus A1 vs A2 vs B Wood Pellets: Which Grade Should You Buy?

Buyer Guide · October 4, 2026 · 4 min read

Close-up of ENplus certified wood pellets
4 min read Buyer Guide Biomix Energy Team

Two bags of wood pellets can look identical and still perform very differently in your stove. The difference is usually the grade. ENplus, the most widely used quality scheme for heating pellets, splits pellets into three classes – A1, A2 and B – based on the international standard ISO 17225-2. This guide explains what each grade means and how to choose.

What is ENplus certification?

ENplus is a certification scheme for wood pellets used in heating. It covers the whole supply chain – from the producer to the trader and the bagging plant – and checks that pellets meet fixed limits for moisture, ash, durability, chemical content and energy. Each certified company receives an ID number printed on the bag, so a buyer can trace where the pellets came from.

The technical limits come from ISO 17225-2, the international standard for graded wood pellets. ENplus adds factory audits, regular lab testing and rules for bag labelling.

ENplus A1, A2 and B compared

All three grades share the same size (6 or 8 mm diameter, 3.15–40 mm length), maximum moisture of 10% and bulk density of 600–750 kg/m³. The table shows where they differ.

PropertyENplus A1ENplus A2ENplus B
Ash content≤ 0.7%≤ 1.2%≤ 2.0%
Mechanical durability≥ 98.0%≥ 97.5%≥ 97.5%
Fines (<3.15 mm)≤ 1.0%≤ 1.0%≤ 1.0%
Net calorific value≥ 16.5 MJ/kg≥ 16.5 MJ/kg≥ 16.5 MJ/kg
Nitrogen≤ 0.3%≤ 0.5%≤ 1.0%
Ash melting (deformation) temp.≥ 1200 °C≥ 1100 °C≥ 1100 °C
Typical raw materialClean stem wood, sawdustStem wood, some barkWider range incl. bark, recycled clean wood

ENplus A1: premium grade for home stoves

A1 is the top grade and the one most residential pellet stoves and small boilers are designed for. Low ash means the burn pot stays clean for longer, ignition is reliable and you empty the ash pan less often. High durability means fewer broken pellets and less dust in the hopper and auger. If you heat a home, A1 is almost always the right choice. Our Premium Wood Pellet (WP01) is produced for this segment.

ENplus A2: for larger boilers

A2 pellets allow a little more ash and nitrogen. They are often used in medium and larger automatic boilers – schools, hotels, apartment buildings – where the burner has automatic de-ashing and the price per tonne matters more. In a small stove, A2 pellets usually work, but you will clean more often.

ENplus B: industrial and commercial use

B grade is intended for industrial and commercial burners that can cope with higher ash. It is not recommended for home stoves: extra ash can form clinker (fused ash lumps) in the burn pot, block air holes and cause the stove to shut down.

How to choose the right grade

  • Home pellet stove or small boiler: ENplus A1 or an equivalent premium pellet tested to A1 limits.
  • Commercial boiler with automatic ash removal: A2 can reduce cost without hurting performance.
  • Industrial burner or power plant: B grade or industrial pellets specified by contract.
  • Always check your appliance manual: many manufacturers void the warranty if non-certified or low-grade pellets are used.
Tip: Ask your supplier for a recent lab analysis (moisture, ash, durability, calorific value). A serious producer can share test certificates – Biomix Energy publishes its quality certificates online.

How to spot good pellets without a lab

  1. Dust in the bag: a little is normal, a lot means low durability.
  2. Shine and smooth surface: good compression gives a glossy surface with few cracks.
  3. Water test: drop a few pellets in water – quality pellets swell and break apart into sawdust within minutes, with no binders floating.
  4. Ash after burning: premium pellets leave a small amount of fine, light ash, not hard lumps.

Frequently asked questions

Is ENplus A1 better than A2?

For home stoves, yes. A1 has lower ash (≤0.7%) and higher durability (≥98%), which means cleaner burning and less maintenance. A2 is perfectly suitable for larger boilers with automatic ash removal.

Can I burn ENplus B pellets in a pellet stove?

It is not recommended. B grade allows up to 2% ash, which can form clinker in small burn pots and cause shutdowns. Use A1 pellets unless your stove manufacturer says otherwise.

Do A1 pellets give more heat than A2?

Not necessarily. All ENplus grades must reach at least 16.5 MJ/kg. The main differences are ash, durability and chemical content, which affect cleanliness and reliability more than raw heat output.

What size are ENplus pellets?

ENplus pellets are 6 mm or 8 mm in diameter. Most home stoves use 6 mm pellets.

Need a quote from Biomix Energy?

We manufacture and export wood pellets, firewood, wood chips, charcoal, olive pits, animal bedding and alfalfa from our factory in Damietta, Egypt. Tell us the product, quantity and destination port and we will reply with specifications and a price.

WhatsApp Call us